Metal Exponents is a reliable sheet pile supplier in the Philippines, carrying SPU sheet pile sections for contractors, engineers, developers, and project teams working on retaining walls, marine structures, and infrastructure works nationwide. With 45 years of experience in imported steel supply, we maintain a stable, quality-controlled supply for projects across the country.
Steel sheet piles are long, interlocking sections driven into the ground to form a continuous wall that resists lateral pressure from soil or water. A sheet pile supplier in the Philippines stocks these sections for retaining walls, cofferdams, quay walls, riverbank protection, flood control, and temporary or permanent earth-retention systems.
As a sheet pile supplier in the Philippines, Metal Exponents carries the following SPU sections for retaining, excavation, and structural applications.
SPU II sheet piles belong to the standard U-type series, offering a practical profile with reliable interlocks for forming continuous retaining walls.
| Specification | Details |
|---|---|
| Width | 400 mm |
| Height | 100 mm |
| Thickness | 10.5 mm |
| Section Area | 61.18 cm² |
| Weight | 48 kg/m |
| Wall Weight | 120.1 kg/m² |
| Moment of Inertia | 8,740 cm⁴/m |
| Section Modulus | 874 cm³/m |
SPU III sheet piles use a deeper U-profile to improve flexural efficiency while maintaining a continuous, watertight sheet pile wall.
| Specification | Details |
|---|---|
| Width | 400 mm |
| Height | 125 mm |
| Thickness | 13.0 mm |
| Section Area | 76.42 cm² |
| Weight | 60.0 kg/m |
| Wall Weight | 149.9 kg/m² |
| Moment of Inertia | 16,800 cm⁴/m |
| Section Modulus | 1,340 cm³/m |
SPU IIIA sheet piles are optimized around profile geometry, allowing greater bending efficiency through a refined cross-section rather than additional material.
| Specification | Details |
|---|---|
| Width | 400 mm |
| Height | 150 mm |
| Thickness | 13.0 mm |
| Section Area | 76.4 cm² |
| Weight | 60 kg/m |
| Wall Weight | 150 kg/m² |
| Moment of Inertia | 22,600 cm⁴/m |
| Section Modulus | 1,510 cm³/m |
SPU IV sheet piles feature a reinforced U-profile developed for retaining systems that demand higher structural rigidity and bending performance.
| Specification | Details |
|---|---|
| Width | 400 mm |
| Height | 170 mm |
| Thickness | 15.5 mm |
| Section Area | 96.99 cm² |
| Weight | 76.1 kg/m |
| Wall Weight | 190.4 kg/m² |
| Moment of Inertia | 38,600 cm⁴/m |
| Section Modulus | 2,270 cm³/m |
SPU VL sheet piles are part of the wide-profile series, enabling broader wall coverage and fewer interlocks across long retaining wall runs.
| Specification | Details |
|---|---|
| Width | 500 mm |
| Height | 200 mm |
| Thickness | 24.3 mm |
| Section Area | 133.8 cm² |
| Weight | 105 kg/m |
| Wall Weight | 210 kg/m² |
| Moment of Inertia | 63,000 cm⁴/m |
| Section Modulus | 3,150 cm³/m |
SPU VIL sheet piles combine a wide-profile design with a heavy rolled section, providing a robust solution for large structural retaining systems.
| Specification | Details |
|---|---|
| Width | 500 mm |
| Height | 225 mm |
| Thickness | 27.6 mm |
| Section Area | 153.0 cm² |
| Weight | 120 kg/m |
| Wall Weight | 240 kg/m² |
| Moment of Inertia | 86,000 cm⁴/m |
| Section Modulus | 3,820 cm³/m |
SPU IIW (SX10) sheet piles use a wide-profile configuration that streamlines wall assembly by increasing effective coverage with each installed pile.
| Specification | Details |
|---|---|
| Width | 600 mm |
| Height | 130 mm |
| Thickness | 10.3 mm |
| Section Area | 78.70 cm² |
| Weight | 61.8 kg/m |
| Wall Weight | 103.0 kg/m² |
| Moment of Inertia | 13,000 cm⁴/m |
| Section Modulus | 1,000 cm³/m |
SPU IIIW (SX18) sheet piles balance wide-profile coverage with a refined cross-section that enhances wall stiffness and structural continuity.
| Specification | Details |
|---|---|
| Width | 600 mm |
| Height | 180 mm |
| Thickness | 13.4 mm |
| Section Area | 103.9 cm² |
| Weight | 81.6 kg/m |
| Wall Weight | 136.0 kg/m² |
| Moment of Inertia | 32,400 cm⁴/m |
| Section Modulus | 1,800 cm³/m |
SPU IVW sheet piles represent the heavy wide-profile series, combining broad wall coverage with a robust rolled section for high-performance retaining walls.
| Specification | Details |
|---|---|
| Width | 600 mm |
| Height | 210 mm |
| Thickness | 18.0 mm |
| Section Area | 135.3 cm² |
| Weight | 106 kg/m |
| Wall Weight | 177.0 kg/m² |
| Moment of Inertia | 56,700 cm⁴/m |
| Section Modulus | 2,700 cm³/m |
Steel sheet piles are specified across construction and infrastructure projects in the Philippines wherever soil, water, or excavation areas require containment or lateral support. As a sheet pile supplier in the Philippines, Metal Exponents supplies sections for both temporary works such as excavation support and cofferdams, and permanent structures including retaining walls, quay walls, seawalls, bridge abutments, and flood control systems.
Before requesting a quotation from a sheet pile supplier in the Philippines, preparing complete project details allows us to respond more accurately and efficiently. Provide as much of the following as possible:
Preferred sheet pile section, if already specified
Required pile length and quantity
Project location and target delivery date
Intended application and whether use is temporary or permanent
Required steel grade or standard
Mill Test Certificate requirements and engineering drawings, BOQ, or project specifications
As an established sheet pile supplier in the Philippines, Metal Exponents recommends selecting sheet pile sections based on engineering requirements, not price or size alone. The section chosen must account for ground conditions, retained height, and water pressure, as these directly affect wall performance under lateral load. Corrosion exposure, embedment depth, and the applicable design standard further determine which profile and bracing system the project requires.
Because section selection carries structural consequences, final confirmation should always come from a qualified structural or geotechnical engineer. We can support that process with material availability checks, specification review, and quotation preparation.
Metal Exponents is an established sheet pile supplier in the Philippines with 45 years of experience in imported steel supply, supported by a team of engineers, supply directors, and sales professionals across the full procurement process.
We apply rigorous quality check protocols and conduct factory visits to verify that sheet pile sections meet required specifications before shipment. Our range covers standard 400 mm sections, heavy-duty 500 mm sections, and wide 600 mm profiles, giving project teams access to the right section capacity for each application through a single supply partner.
Competitive pricing is maintained through direct relationships with international steel mills, and delivery is supported by a logistics network that extends beyond Metro Manila to project sites across the Philippines.
As your trusted sheet pile supplier in the Philippines, Metal Exponents provides quotation support backed by direct mill relationships and deep experience in the local market. Our sales engineers review submitted requirements, confirm inventory or mill production schedules, and provide a clear itemized proposal with lead times and delivery options.
(02) 8403-2222
4/F FMCB Center, #68 Jupiter St. Bel-Air, Makati City
Working with a reliable sheet pile supplier in the Philippines ensures sections are matched to your project requirements. Send your drawings, BOQ, or technical specifications to our team and we will prepare a quotation aligned with your engineering and procurement requirements.
Send Your Requirements to: inquiry@metalexgroup.com.ph
Steel sheet piles form interlocking retaining walls that resist lateral pressure from soil or water, specified for soil containment, excavation safety, water control, and permanent ground support across applications including cofferdams, quay walls, bridge abutments, and marine works. A sheet pile supplier in the Philippines typically stocks multiple section profiles to match each application's load and corrosion requirements.
Yes. Metal Exponents is an established sheet pile supplier in the Philippines, supplying SPU sections to contractors, engineers, and project teams for construction, marine, excavation, and infrastructure applications. Our supply relationships span China, Japan, Taiwan, Korea, and Europe.
As a sheet pile supplier in the Philippines, Metal Exponents supplies SPU II, SPU III, SPU IIIA, SPU IV, SPU VL, SPU VIL, SPU IIW, SPU IIIW, and SPU IVW sheet pile sections. Each designation covers a distinct section profile suited to different load, depth, and coverage requirements.
Sections differ in width, height, plate thickness, weight, moment of inertia, and section modulus, with lighter sections suited to temporary or lower-load works and heavier, wider sections specified for deeper excavations, marine structures, and higher lateral load applications.
Wide sheet piles, such as SPU IIW, SPU IIIW, and SPU IVW, have a 600 mm width that reduces sections required per wall length and are specified where installation efficiency and sufficient section capacity are project considerations.
Yes. Steel sheet piles serve both temporary and permanent applications when section selection, corrosion allowance, embedment depth, and bracing systems are properly designed. Permanent installations should be reviewed against the project geotechnical report, service life requirements, and applicable engineering specifications.
Yes. Steel sheet piles are well suited to marine construction when corrosion allowance, tidal exposure, and embedment depth are accounted for in the engineering design. Section selection for quay walls, seawalls, and harbor structures should be confirmed against applicable marine engineering specifications and service life requirements.
Section selection depends on the engineering demands of the project — ground conditions, load requirements, and exposure environment all influence which profile performs reliably over the design life. Final determination should always be confirmed by a qualified structural or geotechnical engineer before procurement. We can assist with specification review and material availability as your sheet pile supplier in the Philippines.
Mill Test Certificates may be requested depending on available stock, origin, and supplier documentation. Include any required steel grade, standard, or compliance documentation in the quotation request so availability can be confirmed before procurement.
When requesting a quotation from a sheet pile supplier in the Philippines, provide the preferred section, required length, quantity, delivery location, target date, intended application, and any grade or certification requirements, along with drawings, BOQ files, or engineering specifications where available.
Yes. Metal Exponents is a sheet pile supplier in the Philippines with delivery capability beyond Metro Manila. Confirm the delivery address, site access conditions, and target schedule when submitting your quotation request so transport arrangements can be coordinated.
